hwadesk.blogg.se - Teltonika usb modem driver

Reset configuration – sets device configuration to default.

Read records – read records from device.

Update firmware – updates firmware on device.

Save to file – saves configuration to file.

Load from file – loads configuration from file.

Save to device – saves configuration to device.

Load from device – loads configuration from device.

Main buttons offer following functionality: After any modification of configuration the changes need to be saved to device using Save to device button. TAT100 has one user editable profile, which can be loaded and saved to the device. Various Status info tabs display information about GNSS, GSM, I/O, Maintenance and etc. After launch software language can be changed by clicking in the right bottom corner:Ĭonfiguration process begins by pressing on connected device:Īfter connection to Configurator Status window will be displayed: Make sure you have the correct version installed.ĭownloaded Configurator will be in compressed archive. Configurator operates on Microsoft Windows OS and uses prerequisite MS. Main configuration can be performed via Teltonika Configurator software. These settings should be changed according to the user's needs. Click Finish to complete the setup.Īt first the device will have default factory settings unless you order pre-configured device. Setup will continue installing the driver and eventually the confirmation window will appear. In the following window click Install button. Please download COM port drivers from here.Ģ.Ğxtract and run TeltonikaCOMDriver.exe.ģ.Ĝlick Next in driver installation window.Ĥ.

You are now ready to use the device on your computer.ġ. You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below.Ĥ. Turn on your device by flipping the switch to ON.ģ.Ĝonnect device to computer using Micro-USB cable. Otherwise Micro-SIM card might be damaged or device will not detect it.Ģ. Micro-SIM card insertion/removal must be performed when device is turned off.